Apologies if I've posted this in the wrong place, still new to the site. I've a 2008 Mondeo 2.0 TDCI, bought private and days after buying the engine management light came on, plugged into FORScan and had code P2002, (Diesel particulate filter below threshold bank 1).
Software scanner for Ford, Mazda, Lincoln, Mercury vehicles DPF Regeneration after vaporiser change. I own a 2010 Mondeo 2.0 TDCi 163 Duratorq and around two
* Long life - a 'normal' additive DPF tank needs refilling after approx 60k km, whereas the new Ford cDPF has been developed to last at least 200.000km." 2016 Mondeo Titanium X Pack 2.0 EcoBoost My 5th Mondeo 2.0 TDI Failing The Regenerate The DPF. DPF light came on last week; took it for a run on Saturday to clear it. It failed to clear and the 'glow plug' light has started to flash; then the 'emissions' light illuminated. Other symptoms the cruise control has deactivated (I suspect this is normal and due to the engine faults), and the car is The PCM was already using the latest firmware available. So the take away from my experience is that if your car is constantly trying to regen, and you have the P246B code in the PCM, and a high pressure reading in the DPF with the engine off, then it's most likely the Pressure Differential sensor. Hi Chaps Just joined as I'm facing an issue with my mondeo after a remap. It's a 2018 Mondeo ST line edition with the 180ps Duratorq engine and quickshift box. Its a stage 1 map carried out by a local reputable guy, he's mobile and does it on the driveway. The car has only gained an extra 20bhp b I have added Wynn's DPF cleaner, cleared trouble codes, and went for a ride. Regeneration kicks off, but after several minutes end with P244C. Temperature reaches 580 C. Anyway, soot load values decreased a little bit (closed loop - 89 % to 50 %, open loop - 131% to 108%). Additive zur Regeneration des DPF gibt es NUR bei Motoren von PSA. Antworten. 206driver. am 18. Juli 2014 um 4:47. Ford Focus Mk2 2.0 TDCi Test. von FordFocusDA3. Ford Focus Mk2 1.6 Test.
I have refilled the additive tank last year and later on, cleaned the DPF. Today, after I have puted fuel in the tank, the engine malfunction alert happened and errors that I have low additive level. Strange thing, before I have filled the additive tank, I had no errors at all and I drove about 6000 km.
njyGj.
  • zb8gbbt08x.pages.dev/711
  • zb8gbbt08x.pages.dev/742
  • zb8gbbt08x.pages.dev/168
  • zb8gbbt08x.pages.dev/567
  • zb8gbbt08x.pages.dev/341
  • zb8gbbt08x.pages.dev/535
  • zb8gbbt08x.pages.dev/484
  • zb8gbbt08x.pages.dev/36
  • zb8gbbt08x.pages.dev/53
  • zb8gbbt08x.pages.dev/463
  • zb8gbbt08x.pages.dev/18
  • zb8gbbt08x.pages.dev/506
  • zb8gbbt08x.pages.dev/72
  • zb8gbbt08x.pages.dev/810
  • zb8gbbt08x.pages.dev/684

    • ford mondeo 2.0 tdci dpf regeneration